One assembly. Every retaining point named.

A left-hinged coupling guard with two captive quarter-turn cams and two world-fixed keepers provides the first authored Mining training example.

Equipment: CV-101 · fictional inert training fixture
Model: MIN-CV101-MP2 · website inspection revision A
Coverage: 1 source assembly · 4 inspection views · 3 DRAFT procedures
Sources: Existing authored MP2 geometry and concept imagery; physical dimensions unverified

COMPONENT REGISTER

Keep the same IDs through the task.

CV-101 named training components
ID	Part	Role and boundary
M101	Drive motor	Static context; no drive operation.
GB101	Reducer	Static drive context.
C101	Coupling	Visible with the guard open on this inert model.
CG101	Left-hinged guard	GUARD carries both captive cams.
CAM_A	Upper cam A	Captive quarter-turn cam parented to GUARD.
KEEPER_A	Upper fixed keeper	World-fixed striker and integral frame standoff.
CAM_B	Lower cam B	Captive quarter-turn cam; the fault state leaves B disengaged.
KEEPER_B	Lower fixed keeper	Inspect B against this fixed retaining face.
DP101	Conveyor belt context	Static context. No belt movement or energy simulation.

LINKED TRAINING PROCEDURES

INERT TRAINING

MIN-CV101-TRN-000 · revision A DRAFT · 12 steps

INERT TRAINING

MIN-CV101-TRN-001 · revision A DRAFT · 12 steps

INERT TRAINING

MIN-CV101-TRN-002 · revision A DRAFT · 12 steps

SOURCE QUALIFICATION

Permitted real-equipment CAD or registered multi-view images with scale and exact configuration.
Verified hinge, cam travel, retaining faces, clearances and dimensions.
Approved operating and training procedures, adaptation permission and a named reviewer.
Product workspace and a human-authored Genesis simulation.

BEGIN WITH ONE TASK

A permitted source image, a named procedure owner and one useful acceptance test make a practical starting point.